The function of the Lenco hatch lift system is simple. Since the hatch lift is based around a ballscrew it is able to push or pull a heavy load and remain at a constant position. To raise a load extend the hatch lift by pressing on the upper part of the switch. To lower a load, retract the hatch lift by pressing the lower part of the switch.
Lenco hatch lifts are easy to install because they install with a single power cable. They draw an average of five amps of power and deliver over 500 pounds of push for heavy engine covers, decks, large hatches and electric consoles. The function of the Lenco hatch lift system is simple. Since the hatch lift is based around a ballscrew it is able to push a heavy load and remain at a constant position. To raise a load extend the hatch lift by pressing on the upper part of the switch.
In case of power failure Lenco hatch lifts are supplied with two clevis pins at the mounting brackets. To pull this pin out while the hatch is closed you must rig it to a point outside of the hatch. To insure easy access under any circumstances, try the Lenco Hatch Lift Slide Bracket. Click on the bracket photo for details.
If you can’t get what you want when you want it, call 772-288-2662 for customer service.
