The Lenco tactile switch with L.E.D. indicators and Auto Retractor and Self-Check features is the first switch to integrate a completely waterproof switch with a trim tab indicator.
Part #15070-2001(123SC) for single actuators, and #15071-001 (123DRSC) for dual actuators

• 2 High-intensity L.E.D. Indicator displays show the exact position of your trim tabs at all times
• Photo Eye for optimum viewing in all light conditions
• Backlit Keypad for optimum viewing at night
• Self-Check feature
• Built-in Retractor returns tabs to a fully retracted position when power is removed
• Solid state electronics
• Plug & Play
• Low profile design
• Self-contained, sealed keypad & control box with waterproof Deutsch connectors
• Simple, quick installation
• Fade/smudge proof laser engraved graphics
• Includes 36" power pigtail with waterproof Deutsch connectors for control box
• For 12- or 24-volt applications
• Switches sold separately

OPERATION

The operation of the indicator switch is based on the position of the bow. The left side of the switch controls the port tab. The right side of the switch controls the starboard tab. To lower the starboard bow, press the right (starboard) side of the switch where it reads Down. This will lower the port tab. To lower the port bow, press the left (port) side of the switch where it reads Down. This will lower the starboard tab. The LED displays on the sides of the display will show how far that tab has moved.

When the on/off switch is turned on at the helm the LED displays on the indicator switch will show one up arrow on each side of the switch. This shows that both tabs are fully retracted. While functioning the tabs the LED displays will indicate the position of the tabs by lighting up the further they are pressed Down. As the switch is pressed Up the lights will go out. When power is removed from the switch the tabs will retract from any position before powering down.